Hammer Crusher

PC series hammer crusher suits to crush some brittle materials, such as coal, salt, plaster, alum, brick, tile, limestone, etc.

hammer crusher is a new kind of crusher which has been widely used recently in the industry of limestone crushing. It combines the traditional second crushing and compared with the jaw crusher and impact crusher it has advantages of high energy-saving, area-saving and low investment for once. So it is comparably advanced equipment in the current hammer crusher field. It adopts high production technology to carry out once shaping thus has the features of high efficiency and energy-saving. The product material can be adjusted according to the requirement and coarse, medium and fine material can all be got. No flake, no smoothness and multi edges and corners can guarantee the compression strength. So the product material is especially suitable for highway, construction and big project. Box hammer crusher eliminated the initial crushing of jaw crusher and is a new kind equipment of once crushing to small as well as big materials. It has high output, high efficiency, low power and can save manual and material power so as to reduce the crushing cost.     Working Principle:     Box hammer crusher can change the discharge size by adjusting the grate gap so as to meet the requirements of different customers. It has features of simple structure, high crushing ratio and high production efficiency, etc. And it can be two kinds of crushing: Dry and Wet. The main working part of box hammer crusher is the Rotator with hammer. Rotator is consisted of main shaft, round panel, pin roll and hammer. The rotator which is driving by the motor is whirling rapidly in the crushing cavity.     The material fed into the crusher from the feeding opening is hit, impacted, cut and grinded to be powder by the high speed hammer. Under the rotator, there is the screen plate. The material which is smaller than the size of screen mesh will be discharged out, while those which are bigger than the mesh size will be continually crushed and grinded by the hammer and will be finally discharged.     Features:     (1). Big feeding size. High fine crushing ratio and high efficiency;     (2). Simple structure. Compact equipped. Light weight;     (3). Even size. Little exceedingly-crushing powder;     (4). It has many advantages such as low electricity, easy maintenance, etc. So it is the ideal medium and fine crushing equipment.

Model	Rotor diameter/length mm	Rotor speed r/min	Feeding size mm	Max	Discharging granularity mm	Capacity	Power of moto	Weight (T)	Dimensions mm
PC-1618	φ1600/1800	590	1200×1740	350	20	220-280	500	32.4	6256×3620×2700
PC-1414	φ1400/1400	750	1050×1540	250	20	120-170	280	17.2	2790×2800×2310
PC-1212	φ1250/1250	750	650×1330	200		90-110	185	19.1	4475×3162×2250
PC-1010	φ1000/1000	1000	580×1060	200	8	25-35	185	7.59	3514×2230×1518
PC-1010	φ1000/1000	1000	580×1060	200	10	30-50	160	7.59	3514×2230×1518
PC-1010	φ1000/1000	1000	580×1060	200	15	40-60	132	7.59	3514×2230×1516
PC-108	φ1000/800	1000	580×850	200	13	25-40	110	6.5	3206×2210×1515
PC-88	φ800/800	1000	350×850	200	15	35-45	55	3.05	1515×2831×1040
PC-86	φ800/600	1000	350×570	200	10	20-25	55	2.45	1515×2586×1040
PC-66	φ600/600	1000	295×570	100	10	12~18	45	2.14	1315×840×1501
PC-64	φ600/400	1000	295×450	100	15	10~12	18.5	1.03	1054×972×1117
PC-44	φ400/400	1500	145×450	100	10	5~8	7.5	0.9	744×942×878
PC-41	φ400/175	1000	145×270	50	3	0.5	5.5	0.5	812×1056×1315

model	material in size (mm)	material out size (mm)	capacity (m3/h)	power (kw)	weight (t)	dimensions(mm) (LxWxH)
PC400x300	≤200	≤25	5-10	11	0.8	900x670x860
PC600x400	≤250	≤30	10-22	22	2.26	1200x1050x1200
PC800X600	≤250	35	18-40	55	4.8	1310x61180x1310
PC1000X800	≤350	≤35	25-55	75	5.9	1600x1390x1575
PC1000X1000	≤350	≤35	30-55	132	8	1800x1590x1775
PC1250X1250	≤350	≤35	35-65	180	14	2060x1600x1890
PC1400X1400	≤350	≤35	50-100	280	32	2365x1870x2220
PC1600X1600	≤350	≤35	100-150	480	37.5	3050x2850x2800

Hammer Crusher